About 696 Trademarks found that are owned by Emerson Electric Co

The mark consists of a hexagonal design consisting of separate shapes in which over the right portion are the letters "SNR" below which are the words "SCROLL NOISE REDUCTION".

VALVES FOR FLUID CONTROL

The mark consists of a double helix design, which creates an abstract image of the letter E, with the word "EMERSON" underneath.

[ accelerometers; acoustic transmitters for industrial or commercial use and in connection with products other than consumer electronic equipment, namely, wireless transmitters for monitoring acoustic levels in commercial and industrial equipment and facilities; audible signaling devices for industrial or commercial use with products other than consumer electronic equipment, namely, audio alarms to signal an evacuation or other alarm condition in industrial or commercial equipment or facilities; ] battery power modules for powering transmitters and sensors for monitoring and measuring industrial processes and facilities; cargo monitoring systems comprising level gauges, pressure and temperate sensors and electronic hardware and software for measuring and controlling cargo fluids; chemical detectors for commercial, industrial, institutional, and agricultural use; [ circuit breaker panel boards; ] computer hardware and software, namely, hardware and software that creates internal communication hubs and monitoring and control capabilities within industrial facilities to allow industrial equipment and devices to communicate, share, and analyze information for industrial process control, maintaining and repairing plant equipment, maintaining records on industrial plant equipment, and communicating among industrial process control devices; computer software for use in oil and gas reservoir simulation, modeling and analysis; computer software for use in the monitoring, management, and analysis of oil and gas production systems; control and monitoring systems for pipelines and valve actuators comprised of computer hardware and software that monitors line pressure or other conditions at a pipeline valve site and provides data acquisition and supervisory control of a valve actuator; control system software for monitoring and controlling flow metering and flow meter systems; control valves for regulating the flow and pressure of gases and liquids; corrosion sensors and monitors for use in oil and gas production systems; densitometers, not for medical use; digital valve controllers, namely, micro-processors based hardware and software used to control valves used in industrial and commercial processes; eddy current sensors; electric and electronic connectors, namely, glass to metal hermetic seals and connectors; electric valve actuators; [ electrical and power controllers for HVAC and commercial and industrial refrigeration compressors; electrical connection enclosures and junction boxes; ] electrical control stations comprised of electric actuators, electric contactors, pilot lights, and electrical switches for use in industrial and hazardous applications; [ electrical fittings, namely, electrical fittings for electrical cables, electrical conductors, electrical conduits, electrical receptacles, and electrical switches, excluding electrical fittings for consumer electronic devices for use in the home, office, and vehicles, or carried on the person; electrical fittings for hazardous applications, namely, electrical fittings for electrical cables, electrical cords, electrical conduits, and electrical outlets excluding electrical fittings for appliances and lighting fixtures that are designed to be moveable and not permanently affixed; ] electrical grounding indicators; [ electrical plugs and receptacles; electrical transducers; ] electro-hydraulic valve actuators; [ electromagnetic valves for controlling gas and liquids in gas appliances, HVAC and refrigeration systems; ] electromechanical valve controllers, namely, electromechanical controllers for controlling the operation of rotary and linear valves and actuators; [ electronic controls for building and commercial and industrial refrigeration systems, HVAC, lighting and air quality systems; electronic controllers for air conditioning and commercial and industrial refrigeration equipment; ] electronic controllers for monitoring and controlling industrial processes and machinery; [ electronic controls for commercial and industrial refrigeration compressors; ] electronic controls for valve actuators; electronic detectors for locating and tracking pipeline inspection gauges; electronic devices for locating buried pipes, cable, utility lines and tanks; [ electronic diagnostic and motor protection modules for compressors; electronic limit switches; electronic modules for monitoring, recording, and transmitting HVAC and commercial and industrial refrigeration system information; electronic power usage monitors; ] electronic transmitters for monitoring and transmitting data relating to industrial processes and facilities; electro- pneumatic valve positioners; feedthroughs; flame detectors excluding those that are in-home, stand-alone and that are not centrally monitored; flammable vapor sensors excluding those that are in-home, stand-alone and that are not centrally monitored; flow regulators for commercial and industrial use; gas and gas leak detectors excluding those that are in-home, stand-alone and that are not centrally monitored; gas and liquid custody transfer systems comprising level gauges, pressure and temperature sensors, electronic hardware and software for use in monitoring, measuring, and controlling the custody or transfer of gases and liquids; [ hermetic sight glasses for use as windows for visual level and flow indicators namely, hermetically sealed optical window systems for use in high-pressure or vacuum applications; ] high level and overfill alarms for commercial, industrial, institutional, and agricultural use; [ HVAC and commercial and industrial refrigeration system components, namely, accumulators, filter driers, and moisture indicators; ] industrial process control software; laser distance meters; level measurement devices for measuring solid, liquid and gas levels in tanks and other vessels; level sensors for measuring the level of fluids and solids in tanks; level switches, gauges, indicators and transmitters for monitoring and controlling liquids and dry products in tanks and vessels; [ lighting control panels; lighting controls; ] line break controls for automatically detecting pressure drops in gas pipelines and closing valves to prevent further gas leakage; liquid and gas meters for measuring density concentration or viscosity; liquid and gas sensors for determining the characteristics of liquids in industrial processes; liquid level controllers; liquid level sensors; liquid level switches for monitoring and controlling liquids in tanks and vessels; meter systems to measure flow comprising flow meters, valves, provers, control panels, and computer hardware and software for measuring and controlling the flow of liquids and gases; [ modules for monitoring electric current and electric signals for commercial, industrial, and agricultural HVAC and refrigeration systems; ] oil and gas monitoring systems comprised of computer hardware and software that orders and transmits pressure and temperature gauge and sensor readings from oil and gas wells for use in measuring pressure and temperature downhole and in oil and gas reservoirs; orifice plates for metering or controlling the flow of liquids and gases; pneumatic volume boosters, namely, pneumatic devices comprised of diaphragms used for amplifying pneumatic control signals not for use in consumer electronic equipment; position sensors; power switches; pressure controllers for controlling the pressure of liquid, semi- liquid and gaseous substances in industrial and commercial processes; pressure regulators for use in breathing gases, anesthetics and diagnostic applications in the medical and healthcare industries; pressure relief valves for commercial and industrial use; pressure sensing trip valves; pressure shut off valves for commercial and industrial use; pressure switches and sensors for monitoring, controlling and switching hydraulic or pneumatic systems; pressure transducers, namely, pressure transducers that convert hydraulic or pneumatic pressure into analog electrical signals for monitoring and controlling hydraulic or pneumatic systems; provers for calibrating flow meters; [ reels for electrical wire; ] retrieval systems comprised of hydraulic, mechanical, and subsea retrieval tools, service isolation valves, pressure relief valves, pressure guages, corrosion data measuring and collecting probes, corrosion sensor, and chemical injection and measuring tools designed for installing and retrieving measurement and monitoring devices in oil and gas production systems; sand erosion sensors and monitors for use in oil and gas production systems; [ security lights for outdoor use; ] software for managing, monitoring, and controlling industrial manufacturing processes; software for remote control and monitoring of computers and electronic devices for commercial, industrial, institutional, and agricultural use; [ software for use in diagnosing and monitoring the operation of compressors and HVAC systems; ] solenoid valves; speed sensors; surge protectors; [ systems comprised of computer hardware, software, and temperature, humidity, ventilation, carbon dioxide and oxygen sensors that collect and transmit shipping container conditions for remotely monitoring and controlling refrigerated shipping containers; ] tank gauging systems comprising level gauges, temperature transmitters and sensors and software for monitoring and controlling fluids contained in tanks and other vessels; temperature controllers for controlling the temperature of gases and liquids in industrial and commercial processes; [ temperature sensors and controls, namely, bimetallic disc controls and limits; temperature, humidity and pressure probes for commercial and industrial refrigeration and HVAC applications; ] thermal fuses for electrical current; thermistors; transmitters and sensors for measuring temperature, pressure and liquid levels; transmitters for transmitting information relating to liquid level in tanks and vessels; valves to regulate the flow of gases and liquids in HVAC and commercial and industrial refrigeration applications, namely, expansion valves, shutoff valves, solenoid valves, check valves; velocity sensors; vibration transmitter, namely, electronic devices for detecting, monitoring, and transmitting vibration information; video inspection systems primarily comprised of monitors, video and image recorders, reels of electric cable, cameras, and handheld devices in the nature of video recorders and video monitors for video inspection of drains, sewers, and pipes; wireless adapters and gateways for transmitting data relating to industrial processes and facilities; wireless position monitors for commercial, industrial, institutional, and agricultural use, namely, position sensors and transceivers for monitoring valves, regulators, and level sensors; wireless temperature and humidity sensors for commercial, industrial, institutional, and agricultural use; [ wireless temperature and humidity sensors excluding wireless temperature and humidity sensors for electrical and electronic appliances that are designed to be moveable and not permanently affixed, and not centrally monitored; ] position monitors and transmitters for monitoring and transmitting equipment position information for use in industrial process control systems; [ ceiling fan accessories, namely, fan controls; furnace, HVAC and commercial and industrial refrigeration electric system controls ]

The color(s) blue and silver is/are claimed as a feature of the mark.

Engineering consultation services regarding the configuration, efficiency, operation and condition of heating, ventilating, and air conditioning (HVAC), and refrigeration equipment and systems; engineering consultation services regarding industrial process automation; remote monitoring of heating, ventilating, and air conditioning (HVAC) and refrigeration equipment and systems; equipment calibration services; Engineering services, namely, providing design, testing, analysis, studies, recommendations, plans, monitoring and inspection of industrial process automation systems for engineering purposes; technical monitoring, testing and analysis of industrial machinery and electrical equipment and systems to ensure proper operation, safety, efficiency and maintenance; laboratory and field testing and analysis of oils for industrial applications; engineering; engineering services, namely, providing engineering assessments of the performance, reliability, maintenance and configuration of data center and commercial and industrial cooling systems; contractor and project management services, namely, design, selection and implementation of industrial process automation equipment and systems

Replacement filters for wet/dry vacs; replacement parts for vacuum cleaners, namely, filters, hoses, bags, nozzles, brushes; vacuum cleaner accessories, namely, electric pumps

The mark consists of the stylized representation of a pair of helices creating an abstract representation of an "E".

Installation, maintenance and repair of plastics joining equipment, precision cleaning equipment, ultrasonic processing equipment, ultrasonic metal welding equipment, electric motor drives and drive systems, valves and valve systems, industrial process automation equipment and systems; consulting, namely, providing assessment for maintenance purposes of the performance, reliability, and maintenance of industrial process automation systems and commercial, residential and industrial cooling systems

compressors for use in refrigeration, heating, ventilation, and air conditioning; [ dishwashers; washing machines for use in laundries; electrically powered finishing mills for deburring, flash removal, edge-breaking, rough or smooth surface preparation, radiusing, precision surface reduction, descaling, burnishing, and chemical treating; ] and valves for fluid control being parts of machines

[ ELECTRICALLY OPERATED SOLENOID VALVES ]

The mark was first used in commerce in a different form other than that sought to be registered at least as early as 00/00/1925

The mark consists of the word "WORKSHOP" with draftsman-type markings on the letters "W", "R", "K", "H" and "P" centered over the words "WET/DRY VACS" with solid black rectangular shaped drawings on the left and right side of those words.

The mark consists of the words "SUCK IT UP. GET IT DONE." within a circle outlined by a thick black outline.